The steady miniaturization in the world of electronics calls for steadfast and reliable ESD protection. According to DIN EN 61340-5-1, all areas that have direct or indirect contact with parts or components need comprehensive protective measures.
Every year damages adding up into the millions of dollars occur in electronic manufacturing industry. This makes certified quality management systems according to DIN EN ISO 9001:2000 not only essential, but absolutely imperative.The ESD Norm DIN EN 61340-5-1 requires quality assurance of the measuring equipment and a periodic verification of the EPA protective measures. ESD protection has become indispensable in guaranteeing quality control.

Inspection and ESD measuring in electronics production

Stat-X offers an inspection of your electronics manufacturing process using the appropriate ESD protection norms. The seriesDIN EN 61340 und VDE 0100 are included.
The inspection of the ESD protection system is modeled after typical internal audit procedures. Measurements are taken and your ESD coordinator will be given expert advice. Together in consultation a schedule for inspections and ESD measurements will be drawn up.

• Quality control handbook with ESD protection instructional material
• Internal (in house) ESD training materials
• Delivery
• Receiving
• Warehouse
  
• SMD assembly lines
• Hand assembly lines
• System assembly
• Test-Benches
• Repairs
• Service
• Development
  

The audit process always contains the following three parts:

• Visual Survey
• Electronic Measurements
• Employee Interviews

Inspection and measurements take place at chosen work stations. The measurements are taken by calibrated instruments. They are then documented and analyzed. At the end of the inspection you are given a detailed transcript and analysis of the measurements. On request we can support your ESD Coordinator implement improvements.

“Workers must be trained and instructed so that they are able to effectively use materials, tools and can carry out procedures correctly. Workers must also understand the necessity of electrostatic precautions.“ (IEC 61340-5-1, chapter 8)

Stat-X offers not only the necessary equipment for an effective and successful ESD prevention program, but also offers training, instructional seminars and information programs for all areas of your company :

• Management
  Information about the purpose, profitability, organization and implementation of an ESD protection program.
  
  
• Development and System Design
  Information as to how to improve the ESD resistance of circuits andcircuit boards.
  
  
• ESD Coordinator
  Further training and instruction for ESD protection in the electronics industry in accordance with current norms and standards. The instructional materials have been approved by the TÜV Rheinland.
  
  
• Employees in production, logistics, worker training and quality control
  Basic training or yearly instruction on the topic of working in the EPA. The goal of the sessions is to gain an acceptance and integration of ESD protection and personnel grounding by offering clear, understandable information combined with effective demonstrations.

Sample trainings seminar “ESD Coordinator”

09h00 10h15 12h30 15h15 16h30

Introduction, goals and organization ESD basics and risk factors Exercise 1: Charge of good and poor materials The ESD Protective Zone EPA Conductivity and dissipation of charge Exercise 2: the EPA und the protective results Packaging and Transport The three rules Damage and losses Norms and internal guidelines Exercise 3: Checking and measuring Humidifying and Ionization Exercise 4: Improvements Conclusion, summary discussion ESD Quiz

Upon request we can create a trainings program tailored exactly to your company's needs and based upon your associates' previous experience.